What are the Precision Metal stamping companies near me？
Balford has passed ISO9001 in 2017. We has over ten years experience on manufacturing motor housing, solenoid valve housing and sensor housing, focused on auto parts.Now Balford enter into solenoid valve housings and sensor housings industry that are mainly based on difficult deep drawing process.
What is precision metal stamping?
Precision metal stamping is a high-volume metalworking process that uses stamping tools to create sheet metal parts by stamping the material into the desired shape. This is done according to a pattern where each part is removed from the motherboard after stamping.
Precision metal stamping methods allow manufacturers to create parts that require undercuts, multiple features or frangible walls for assembly.
It uses high pressure equipment to press the metal sheet into the mold, so the shape of the product has geometric precision and excellent surface finish.
Sensor End Cup
The advantages of precision metal stamping
Precision metal stamping offers manufacturers and end users a variety of advantages. These include:
-
Mass production
Precision metal stamping can make thousands to millions of parts in a single run. This is more productive than other metalworking processes such as CNC machining, fabrication or welding.
This process is ideal for high volume manufacturing, where hardware parts are manufactured in large volumes.
-
Evenness
Precision metal stamping is versatile, the same tooling can be used to produce a variety of components, and requires little additional setup or adjustment between production runs.
Therefore, precision metal stamping has higher uniformity compared to other industrial processes. Since all products are stamped from sheet, they have the same wall thickness and nearly the same surface finish, making post-production assembly and quality control inspections easier.
Precision metal stamping also supports mass customization of final products through automated variable design to quickly meet unique customer requirements.
-
quality
Precision metal stamping is a versatile process capable of producing a range of parts with varying surface finishes and tolerances.
It also produces parts with thin walls, deep draws and undercuts that would otherwise be challenging to produce using other processes such as CNC machining or fabrication.
This makes precision metal stamping an excellent choice for aerospace, medical implants, automotive, lighting and consumer electronics product development where precise shapes and thin walls are required.
Precision metal stamping is one of the few technologies capable of producing the specific thin-wall geometries required for demanding electronic packaging applications due to its ability to create deep-drawn features.
-
easy to use
Engineers and designers find precision metal stamping easy to use because it can replace complex shapes with minimal tooling.
This capability provides customers with greater design flexibility and opens the door to conceptual exploration early in product development.
It also helps them reduce costs by minimizing material waste, as fewer mold changes are required with each new part design iteration.
Using precision metal stamping makes it easier to manufacture precisely designed parts because they require less machining time for secondary operations throughout the production process. This results in a more efficient workflow, especially at high volumes.
-
Minimize material waste
Precision metal stamping is an economical manufacturing process because it uses the minimum amount of material needed to make the part.
This feature allows manufacturers to manufacture thin-walled products without the need for complex secondary operations, such as CNC machining, which can be time-consuming and expensive.
-
Cost-effectiveness
Compared to large die casting machines for mass production, precision metal stamping has lower start-up costs. Therefore, it is beneficial when the production demand is not large but the volume is still high.
It also provides a high degree of flexibility, with design options available to manufacturers for custom-made items that cannot be produced any other way. This means they can earn higher profits without much initial investment.
-
Minimal secondary operations
For precision metal stamping, secondary operations, such as cutting threads after production, are usually not required. The process simultaneously creates accurately shaped features without any errors, such as pre-drilling, countersinking, or cutting threads. Secondary machining often adds cost and time-to-market, but hand-finishing is minimal after stamping, again saving money and time.
Precautions when using precision metal stamping technology
-
Surface Quality
The surface quality of a stamped part depends on the metal used, its hardness, thickness and whether it is heat treated after stamping. Softer materials are more prone to scratching during the stamping process, while thicker metals are less prone because they are more resistant to pressure from the tool. Heat treatment helps improve the grain structure of the metal, making it harder and more resistant to wear without compromising the strength of the material.
-
undercut
Undercuts can cause difficulties during stamping because they make it difficult for the tool to fully penetrate the sheet metal.
One way to get around this is to use a progressive die instead of one big die to cut out the shape of all the parts at once. Multiple dies perform small cuts until all part features are achieved. Progressive punching also reduces the force required to release the undercut, but it also limits production speed and can lead to irregular shapes that require secondary operations to clean up.
-
Tolerance and Accuracy
Tolerance refers to the amount of variation allowed in dimensions in the part design, while accuracy refers to how close the final measurement is to the expected dimensions.
Precision metal stamping can achieve precise dimensions and tight tolerances because, unlike other manufacturing processes, it uses controlled forces to produce parts.
Parts produced using this process are closer to specification than parts made using alternative methods such as CNC machining or welding.
-
Material strength and tool wear
To keep costs low, manufacturers often use softer, cheaper metals to make tools. However, using less robust tooling results in a compromise in material strength that can adversely affect design and quality, especially when the product requires thin-walled geometries. Such tools can place excessive compressive stress on components.
Stress from the tool is a major cause of material deformation, so this trade-off must be considered when designing metal stampings.
-
Product Complexity and Cost
The complexity of a part’s design determines how many tools are required to manufacture all its features. However, manufacturers may address this cost by performing secondary operations on specific components in the same production run, rather than making unique tooling for complex shapes or geometries such as undercuts.
This allows manufacturers to produce multi-component products in multiple materials at once without increasing costs.
Sensor End Cup
What to Look for in a Precision Metal Stamping Partner
experience and knowledge
Experience plays an important role when using precision metal stamping in assembly
, knowledge of the process itself, combined with experience working with different metals and tolerances, is key to ensuring parts are built to specification while maintaining strength.
machine capacity
Part design directly affects machine productivity. Production capacity may be limited by material thickness and the overall maximum pressure applied to the sheet metal during production. It must be ensured that the machine used for this method can handle the weight and size of the components, while also taking into account the part geometry and quantity required for each run.
Mold quality
The materials used can reduce or increase tool wear and increase or decrease cost, so finding a balance between hardness level and tool life is critical. How often manufacturers use precision metal stampings to produce parts determines the wisdom of investing in high-quality tools that last longer and have less downtime between runs.
Quality Control Measures
The best practice for quality control using this manufacturing method is to check dimensions after the part is released from the press, and then perform secondary operations to reduce the number of unique tools required for each part produced.
Punch customization
Machines used for precision metal stamping can be modified with different tool assemblies to create the unique shapes and features required for the product.
If desired, manufacturers offering this service can alter equipment controls to reduce cycle time or create fixtures for secondary operations.
Stamping capacity
When choosing a manufacturing partner, keep in mind that metal stamping capabilities vary by machine model, so you must consider the type of parts being manufactured, which metals are used in production, whether they are thick or heavy, and more.
It’s also wise to ask about the secondary operations the company offers and whether the machines used for this process are customizable. This is because specific customization options can be more expensive, depending on the manufacturer.
Outer Shell Top Cap
Precision Metal Stamping Capabilities and Industries We Serve
We provide in-house metal stamping services to customers who wish to leverage our R&D team’s experience in designing, prototyping and manufacturing parts used in applications requiring high durability.
Customers can choose from a wide range of stamping capabilities, including thickness, type of metal used and overall sheet size.
Equipped with state-of-the-art equipment such as press brakes and transfer presses, our metal stamping facilities can handle everything from heavy-duty parts to those made of thin-gauge metal. We stand out from our competitors because we can produce precision parts without sacrificing quality.
We have multiple industry partners that allow us to create streamlined supply chains and provide cost-effective ways to deliver products efficiently, allowing manufacturers to focus on their strengths without worrying that they have neither the ability nor the expertise to come Handle outsourced services.
Summarize
Precision metal stamping is used in a variety of industries to produce metal parts with complex geometries and other features that are too costly or impossible to manufacture with alternative manufacturing methods such as die casting and machining.
While manufacturers need to consider budget, machine capacity, tool quality, and other factors when choosing the right process for their business, precision metal stamping is known for its accuracy.
