The quality of products is a matter of great concern to us at any time, and how to ensure the quality of stamping parts processing is a necessary thing. In a very competitive society, we can better ensure the quality of precision metal stamping parts processing, so that customers can get better guarantees. As a stamping parts manufacturer, we must do a good job in all aspects of quality assurance.
Coolant Temperature Senders Housing
Metal Stampings company
Balford has passed ISO9001 in 2017. We have over ten years experience on manufacturing motor housing, solenoid valve housing and sensor housing, focused on auto parts.Now Balford enter into solenoid valve housings and sensor housings industry that are mainly based on difficult deep drawing process .
We employ documented procedures for every step in the manufacturing process from initial program launch through steady-state production in order to ensure consistent performance. We engineer our processes to produce the desired results, monitor those results, and use what we learn to regularly refine our processes as part of our commitment to continuous process and efficiency improvement.
Many of our customers have been with us for 5-8 years or more. Year after year, they experience zero late deliveries and zero returns.
If you want to ensure the quality of fine metal stamping parts processing, you must ensure that your own skills are mature. The immaturity of technology will lead to the unqualified quality of stamping parts processing products. These aspects are extremely critical to stamping parts manufacturers. The continuous progress in technology will improve the quality of stamping parts processing. guarantee.
The quality of metal stamping parts is directly related to the production equipment itself. In the process of practical application, simple tire replacement, stable operation, and one-time product molding are all very important contents, and people need to better enrich relevant knowledge in various parts.
It also replaces the cutting method as much as possible, because the cutting process will emit a lot of noise and cause great damage to the human body. The production technology and supporting technology category of metal stamping parts is a huge and complex systematic project, so special technical personnel and technicians are required to engage in the work to cooperate with the work required by fine blanking.
Water Temperature Sensor Brass housing
How to Ensure Quality and Precision When Choosing a Metal Stamping Provider
- Ensure that the direction of the convex and concave metal stamping parts is consistent. Therefore, the convex and concave die should be installed on the turntable according to the installation procedure of the mold. The most important thing is to have irregular metal stamping parts to prevent wrong and reverse installation.
- Regularly check the turntable and die mounting base of the punch press to ensure the coaxial accuracy of the upper and lower turntables.
- When the punch and die edges of metal stamping parts are worn, they should be stopped in time and sharpened in time. Otherwise, the wear degree of the die edges will be rapidly expanded, the die wear will be accelerated, and the quality of the stamping parts and the life of the die will be reduced.
- Before installation and use of metal stamping parts, it should be strictly checked, and the work of removing dirt should be done well. Carefully check whether the guide sleeve and mold of metal stamping parts are lubricated to meet the requirements.
- Regularly replace the springs of the molds to prevent excessive use of the springs, insufficient toughness, and damage to the quality of metal stamping parts.
- Metal stamping personnel should use softer materials to make operating tools when installing molds to prevent damage to metal stamping parts during installation.
