Design of Stamping Die for Extra Thick Stainless Steel Parts Figure 1 shows the parts formed by 304 stainless steel. The monthly output of a single piece is about 300 pieces, and the material thickness is 12.0 mm and 6.0 mm respectively. The dimensions of the part can be obtained by machining and stamping. After…
1. Obtain the necessary information According to the relevant data, the co-construction stamping process is analyzed, and the workpiece is subject to process audit and standardization audit. 1) Obtain product parts drawings indicating specific technical requirements. Understand the shape, size and accuracy requirements of the workpiece. The dimensions (size and location) of critical holes, critical…
Stamping process is a process method of metal forming. At the same time, it is also called one of the four major processes of automobile manufacturing together with welding, painting and final assembly. Therefore, without stamping, the car may still be the same as the previous banging and banging. The level of making 3 cars…
stamping die preventive maintenance Introduction to deep drawing process One: Concept Deep drawing: pressing the sheet into a hollow part (the wall thickness is basically unchanged) Deep drawing process: the material on the plane (flange) is transferred to the side wall of the cylinder (box), so the outer dimensions of the plane change greatly Drawing…
English 
Español 
日本語 
Русский 
Français 
Deutsch 
Italiano 
Tiếng Việt